Welcome to zhoushan jintang YI TONG machinery co., LTD.!




Contact YI TONG

Address:28 Shatang Road, Jintang Town,

Dinghai District, Zhoushan City

Tel: 0580—8050871



How to clean the filter element of the screw machine?
Release time:2017-07-12

The filter element of the screw machine can prolong the service life of zhoushan screw machine. Below are the steps to clean the filter core of the screw machine:

(1) the two terminals that tap the filter core on a flat surface will remove most of the heavy and dry grey sand.

(2) blow the air in the direction of air in the opposite direction of air by the drying air machine which is less than 0.28 MPa. The nozzle is 25mm apart from the folding paper.

(3) if there is grease in the filter element of the screw machine, it should be cleaned 15min in the warm water with no foam detergent.

Copyright YI TONG Screw ALL Rights Reserved.  Zhejiang ICP for 15000167

TEL:0580—8050871  FAX:0580-8055330  Email:butterflybhgbh@163.com

Administrator entry   Technical support:www.21pla.com

Link:Zhoushan Screw